聚结分离器—分离气体中的液体

Coalescer Separator – Separate Liquid from Gas

MODEL GCS

GCS型聚结分离器是集聚结、分离于一体的高效处理单元，能够从含液量较高的气体中有效分离液体颗粒。

The GCS type coalescence separator is a high efficiency unit which can be separated from each other and can be separated from the liquid

工作原理

Principle description

聚结分离器由分离腔和聚结腔两部分结构组成。气体从进口流入聚结分离器分离腔，其流速降低，流动方向改变。气流均匀通过分离元件，大于10μm的液体被除去，同时小液滴被聚结成大液滴。经过分离元件分离大部分液滴后的气流进入聚结腔，气流均匀地从内向外流过聚结元件，聚结元件会深度分离气流中夹带的液滴，进而把0.3μm以上的液滴聚结分离掉。

The coalescence separator by separating cavity and coalescence cavity structure. The two part gas imports from flowing into the coalescence separator separation chamber, the flow rate decreases, the flow direction change. Uniform airflow through the separation of components, more than 10 mu m liquid is removed, and the small droplets are agglomerated into larger droplets. After separation of components of air separation most of the droplet coalescence into the cavity flow evenly from the inside to the outside through the coalescing element, coalescence element droplet entrainment depth separation in the air flow, and the more than 0.3 mu m droplet coalescence separation off.


分离元件分为：

Separate components are divided into:

n 叶片分离器  Blade separator

n 金属丝网捕雾器  Metal wire mesh mist trap

n 旋流分离器  Swirl separator


聚结元件根据聚结滤芯材质不同，分为：

The coalescence elements are classified according to the different materials of the coalescence filter core:

                   ⬛  玻璃纤维材质聚结滤芯

        Glass fiber reinforced polymer filter element

                   ⬛  聚丙烯材质聚结滤芯

        Polypropylene filter element

                   ⬛  聚脂材质聚结滤芯

         - polyester material coalescence filter

                   ⬛  尼龙材质聚结滤芯

        Nylon material poly


性能保证

Performance guarantee


n  995%去除0.5μm以上的液体

 995% remove more than 0.5 m liquid

n  清洁压降<15KPa

   Clean pressure drop <15KPa


应用领域

Application area


n  用于气流中含液量较多，且对液滴分离效率要求较高的工况

 The utility model has the advantages of high liquid content in the air flow and high requirement  for the separation efficiency of the liquid drop


n  工艺气体经过碱洗或胺洗后含液量较高的工况

 The process gas has a high liquid content after alkali washing or amine washing


n  压缩机站：保护压缩机防止被液体颗粒破坏

Compressor station: protect the compressor from being damaged by liquid particles


n  燃料管线到动力设备和发动机

Fuel line to power plant and engine